Chimpanzee bookmark

In the print project, the negative part is inserted. If you dont want a hole in the bookmark, remove it before the print. Model size is 50x150mm, you can scale the size, but when changing dimensions, you must not change the height (Z).  The Model is 50x150mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 1.9mm and the Actual Depth is 1.9mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Bambulab Basic Brown Transmission Distance: 2 PLA Elegoo + White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #8 (0.72mm) swap to Brown At layer #9 (0.8mm) swap to White for the rest.