Thingiverse
Chocube
by chocube
6
Downloads
13
Likes
0
Makes
Make a robot using chocube.
1. Print. Chocube panel & some accessory connectors.
2. Cut. Create DIY (user defined shape) blocks what you want. Use cutter knife.
3. Connect. Use adhesive or ChocoChips(connectors).
Make everything!!!
Create toys. Built a robot.
It's container for your DIY project.
Applications:
IOT, embeded , Robotics, Arduino, Raspberry Pi. , AI Board /SBC Cases , prototype, education.
Important.
Use ABS. ( No PLA . hard to cut)
Fill 100%
Design files:
A. ChoCube10x10.stl
10x10 matrix plate ( size: 10cm x 10cm. it about 4 inch x 4 inch )
If you have a small 3d printer: print this panel.
B. ChoCube20x10.stl
10x20 matrix plate
If you have a large 3d printer: you can print 10x20cm panel.
(compatible with 10x10 matrix panel)
C. ChocoChip.stl
: Multi purpose component:
1. To connect user defined blocks perpendicular( vertical).
2. Put this chips in
1. Print. Chocube panel & some accessory connectors.
2. Cut. Create DIY (user defined shape) blocks what you want. Use cutter knife.
3. Connect. Use adhesive or ChocoChips(connectors).
Make everything!!!
Create toys. Built a robot.
It's container for your DIY project.
Applications:
IOT, embeded , Robotics, Arduino, Raspberry Pi. , AI Board /SBC Cases , prototype, education.
Important.
Use ABS. ( No PLA . hard to cut)
Fill 100%
Design files:
A. ChoCube10x10.stl
10x10 matrix plate ( size: 10cm x 10cm. it about 4 inch x 4 inch )
If you have a small 3d printer: print this panel.
B. ChoCube20x10.stl
10x20 matrix plate
If you have a large 3d printer: you can print 10x20cm panel.
(compatible with 10x10 matrix panel)
C. ChocoChip.stl
: Multi purpose component:
1. To connect user defined blocks perpendicular( vertical).
2. Put this chips in
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!