Choker Style Mouse Trap

❗ BEFORE PRINTING THIS TRAP ❗❗ BEWARE THAT THE WIRE YOU WILL NEED IS VERY THIN AND CAN INJURE YOU IF TRAP IS HANDLED IMPROPERLY. ❗ Inspired by a trap featured on a YouTube Video. HOW IT WORKS: The rubber bands on the rear of the arm constantly puts an upwards force on the arm's front end. The string holds the arm down, this arms the trap. Bait sits behind the string so the mouse can not get to it (without chewing the string of course) Once the string is broken, the upward force of the arm pulls the wire tight and holds the mouse. REQUIRED MATERIALS: Rubber band String Thin wire SETTING THE TRAP: BE CAREFUL AND NEVER PUT YOUR FINGER INSIDE THE TRAP ONCE THE WIRE IS INSTALLED. It is explained in the YouTube video. Easier to set with two people. 1. Place rubber band tight between the hook on the back of the trap's body, and the hook on the back of the arm. 2. Wire goes through the 2 slots in the front, passes through the end of the arm 3. Hold the arm down until the wire sits in t