Christmas Dragonball

by Mano's 3d_Art · Hueforge & Lithophane

0 Downloads

1 Likes

0 Makes

ONLY 3 COLORS SEE TROUGH MODEL Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Kingroon Red Transmission Distance: 4.2 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Red At layer #16 (1.36mm) swap to Mistletoe Green At layer #25 (2.08mm) swap to Jade White for the rest.