Thingiverse
Christmas star
by kthuen
31
Downloads
17
Likes
0
Makes
This star consist of 26 elements that is glued together. I printed it in transparent Spectrum filaments PETG to make it suitable for outdoor use.
The size of the star is about 31cm in diameter.
There is also an holder that fits this kind of ws2812 led lights; https://www.aliexpress.com/item/32816661884.html?spm=a2g0o.productlist.0.0.5c04158enBP27o&s=p You simply zip-tie it to the top of the tree.
Keep in mind that you would need electronics to control and power the lights.
Treetop version:
17 pieces of StarTap.stl
8 pieces of StarTriangleTap.stl
1 piece of StarTreeHolder.stl
Full star version:
18 pieces of StarTap.stl
8 pieces of StarTriangleTap.stl
1 piece of StarTreeHolder.stl
The original star that this is inspired from can be brought here: https://adventsstjerner.dk/vare-kategori/13cm/
The size of the star is about 31cm in diameter.
There is also an holder that fits this kind of ws2812 led lights; https://www.aliexpress.com/item/32816661884.html?spm=a2g0o.productlist.0.0.5c04158enBP27o&s=p You simply zip-tie it to the top of the tree.
Keep in mind that you would need electronics to control and power the lights.
Treetop version:
17 pieces of StarTap.stl
8 pieces of StarTriangleTap.stl
1 piece of StarTreeHolder.stl
Full star version:
18 pieces of StarTap.stl
8 pieces of StarTriangleTap.stl
1 piece of StarTreeHolder.stl
The original star that this is inspired from can be brought here: https://adventsstjerner.dk/vare-kategori/13cm/
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
