Christmas tree foot

Made a stand for the christmas tree.The stem of the tree is 96mm, so the holder can handle that, with a little force also up to 100mm. The set screws are M4x30-50 finger nuts. There are inset for nuts inside so it can be tightened a lot to adjust the tree to be straight.The 3 feet are mounted using 6 M4x30mm screws, the plastic is sized so it can bite with out any nuts. Print settings are:0.4mm nozzle0.24mm layer Draft mode in bbl.Only change is concentric top and bottom layer, otherwise standard. Not really important.