Slicer Discord
Christmas Tree – Modello 3D stampabile da MakerWorld MakerWorld
Other Art Models

Christmas Tree

202 Download
234 Likes
136 Makes
Vai al Modello
The Base and Star will print without support, any settings. The tree will need minor supports in a couple areas, recommend 0.1-0.15mm layer height to keep the detail alive. Use 2x10mm long raw filament pieces as alignment pins to super-glue the tree halfs together. The larger tree can get away with 0.2mm layers without issue. The Globe Mesh may be a little trickier, recommend 0.2mm layers with support, max cooling air, SLOW speed, and 0.5-ish mm Z-hop. A wider extrude may help as well, 0.6mm, even with a 0.4mm nozzle. The idea being that the wider extrude will slump or droop, counteracting the tendancy for overhangs to curl up. If you're looking for the .step/.f3d files, let me know, I'll dig them out.
Categoria
Other Art Models
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
layer da 0.15mm
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Altezza layer
0.15 mm
Post-elaborazione
Incollaggio
Software
Cura, PrusaSlicer o simile
Stesso designer, più piattaforme

mobiobi pubblica anche su

135 modelli aggiuntivi su altre 2 piattaforme

Verificato dalla corrispondenza dei titoli dei modelli tra le piattaforme.
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione