Chuck Norris - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127x170mm in size PLA BambuLab Basic Black PLA BambuLab Basic Gold PLA BambuLab Basic Jade White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Gold At layer #17 (1.44mm) swap to Jade White for the rest. Frame Version: At layer #25 (2.08mm) swap to Gold for the rest. For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually. If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result. Please note that using different brands or colors than those listed may change the final look, so I cannot