Thingiverse
Cigarette disposal station
door Demethan
5
Downloads
4
Likes
0
Makes
Hi,
The pins and knobs are printed at 102% size with PLA. The pins should be printed flat with support at 50% infill. the knobs should be printed flat side down without support, also at 102% size.
the top plate is printed with PETG for flexibility. it is easier to work with for emptying the can.
it is printed at 100% size, 0.8 wall, no infill.
Reminder that plastics are flammable. add some water at the bottom of the can for extra protection. You can also glue an aluminium plate inside the top plate.
This setup was designed to fit the coffee cans we have and the railing at my house.
Can diameter 157mm
railing post 26mm
The pins and knobs are printed at 102% size with PLA. The pins should be printed flat with support at 50% infill. the knobs should be printed flat side down without support, also at 102% size.
the top plate is printed with PETG for flexibility. it is easier to work with for emptying the can.
it is printed at 100% size, 0.8 wall, no infill.
Reminder that plastics are flammable. add some water at the bottom of the can for extra protection. You can also glue an aluminium plate inside the top plate.
This setup was designed to fit the coffee cans we have and the railing at my house.
Can diameter 157mm
railing post 26mm
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!