Thingiverse
Cigpet Capo replacement side covers
door bosshardhans
0
Downloads
0
Likes
0
Makes
It's a cheap mod but didn't really like the designs.
The rear battery cover snaps on, but you will need a torx bit to unscrew the 6 screws visible after removing the cover and batteries. Pry up the front cover first by the overhang the opposite side of the screen, then slowly on all 4 corners.
No shot my printer can print the screw posts so I'm just using automotive mounting tape to secure the front cover. The rear battery cover has provisions for a 5mm x 1mm magnet, make sure you get the orientation right before gluing it into place.
Printed with esun matte black PLA on a float glass bed
The rear battery cover snaps on, but you will need a torx bit to unscrew the 6 screws visible after removing the cover and batteries. Pry up the front cover first by the overhang the opposite side of the screen, then slowly on all 4 corners.
No shot my printer can print the screw posts so I'm just using automotive mounting tape to secure the front cover. The rear battery cover has provisions for a 5mm x 1mm magnet, make sure you get the orientation right before gluing it into place.
Printed with esun matte black PLA on a float glass bed
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
