Circle Pop Fidget (Multi-material design)

This was a fun print where you get to utilize different materials, TPU and PLA/PETG. The outside bumper makes for a softer feel when using the pop fidget. Make sure to print the insert before printing the frame. All credit to 3DPrintyAssemblyPress-fit buttons into the caseIf you want to add a TPU bumper, press it on. Add glue if it feels too looseNo more stepsBumperAdd an optional bumper to give the fidget a larger overall size. The bumper can be printed separately in TPU and forced on.PrintingThis design includes a TPU gasket which is entirely contained within a rigid (PLA/PETG/ABS) frame. Printing requires either a multi-material printer or pausing the print to insert the pre-printed TPU gasket. 92A TPU is recommended, but harder 95A will work.Either wayPrint the TPU Gasket with at least 5 perimeter shells92A TPU or softer is recommendedPrint buttons separately from the caseIf printing on a multi-material printerTurn on the “Interface Shells” so the TPU gasket has a solid base to pri