Slicer Discord
Circle slicer_v1.1 – 3D-Druckmodell von Thingiverse Thingiverse
Circle slicer_v1.1 – Bild 1 Circle slicer_v1.1 – Bild 2 Circle slicer_v1.1 – Bild 3 Circle slicer_v1.1 – Bild 4 Circle slicer_v1.1 – Bild 5 Circle slicer_v1.1 – Bild 6
Tools

Circle slicer_v1.1

von stephen_w · Tools
185 Downloads
427 Likes
1 Makes
Zum Modell
I made a circle slicer, Mainly used for cutting paper.

(Maximum circle diameter ≈30mm Minimum circle diameter ≈6mm)

installation instruction is shown in the picture.

update : To prevent slipping during cutting. Added grip, It is easier to cut. Add the bottom texture to increase friction. Or you can attach double-sided adhesive stickers at the bottom.

update file_v1.1 (other parts_1.1.STL)

special tips:
You need a wallpaper blade, and break off two parts with plier (see picture. ) after inserting blade.(Cut your hand carefully)
You'd batter to fixed the four corners of the paper when cutting paper, and hold center axis cut circle.

( clockwise rotation to loosen anticlockwise rotation to tighten used for fixed dimension when adjustment dimension)

This model was printed using PLA. (fill in 10%,using a lower layer high (0.15/0.2mm),no support)
Kategorie
Tools
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
keine Supports
Ohne Supports Einteilig
Supports 0/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Kleben
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen