Thingiverse
CircleCutter cnc
by ZenziWerken
1.6k
Downloads
1.3k
Likes
0
Makes
Cutting (perfect) circles out of paper or cardboard is not easy if you use scissors. With this rather simple construction it is a piece of cake.
I used 5.2 mm pertinax (phenolic paper) I got from a donor. It's very hard, still good to work with a cnc if you have a single flute end mill. Parameters are: small depth per cut and fast cutting speed. Don't forget to engage a dust collection as the fine dust is not exactly healthy.
The stl is for viewing purpose only. Do not print on a fdm-printer!
Visit https://www.zenziwerken.de/en/ for more interesting designs.
I used 5.2 mm pertinax (phenolic paper) I got from a donor. It's very hard, still good to work with a cnc if you have a single flute end mill. Parameters are: small depth per cut and fast cutting speed. Don't forget to engage a dust collection as the fine dust is not exactly healthy.
The stl is for viewing purpose only. Do not print on a fdm-printer!
Visit https://www.zenziwerken.de/en/ for more interesting designs.
ZenziWerken also publishes on
50 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
