Thingiverse
Circular Knitting Needles (size 20)
par milestorm
71
Téléchargements
66
Likes
0
Makes
# Circular knitting needles size 20mm.
To print these, please print 4 halfs of the needle. Two halves 2 times, and the second two halves also 2 time, BUT mirror them on the Z axis, for the cable to fit. -> see the slicer preview images.
For the cable I used 2 wired audio cable of dimensions 5.3mm X 2.5mm
Cut your desired length and assemble the needles.
**ASSEMBLY:**
- apply some glue (I used Pattex 100%, or you can use superglue) to the inner side of cable hole, and insert cable. it should be tight fit, so you have to press it in.
- apply glue to the pegs, and one half of the needle, and press the two sides together.
- fix the glued needle with some support and let dry.
- repeat for the second needle
To print these, please print 4 halfs of the needle. Two halves 2 times, and the second two halves also 2 time, BUT mirror them on the Z axis, for the cable to fit. -> see the slicer preview images.
For the cable I used 2 wired audio cable of dimensions 5.3mm X 2.5mm
Cut your desired length and assemble the needles.
**ASSEMBLY:**
- apply some glue (I used Pattex 100%, or you can use superglue) to the inner side of cable hole, and insert cable. it should be tight fit, so you have to press it in.
- apply glue to the pegs, and one half of the needle, and press the two sides together.
- fix the glued needle with some support and let dry.
- repeat for the second needle
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !