Circular Twisting Frame Fidget

A twisting fidget with 10 rings (or the smaller one with 5) with each axis angled by 10 degrees. Due to the small surface area of the rings, it is highly recommended to clean your build plate or apply some glue. The rings shouldn't separate with normal play and without excessive squishing of the rings, but if they do it can be put back together easily. No supports are required, and after a bit of twisting after removing from the print bed to get the joints loose everything will play smoothly! If you are not sure if your printer has the correct tolerances, I recommend printing the 5 ring version first, then adjusting XY contour compensation very slightly depending if your test print is too wobbly or too tight. Happy printing!