Citadel paint funnel

I found a good paint funnel for Citadel paints at https://www.baphominiatures.com/paintwidget-1 but it is meant for SLA-printers. So I made one bottom-up for "regular" 3d-printers.

PRINT UPSIDE DOWN as shown in image.

The point is to ease filling dropper bottles from Citadel paints. Btw - when pressed onto the Citadel-bottles it sits FIRMLY. So it actually takes a bit to get it off afterwards. I might look into that.

edit 12.12.2019
Added slimmer version.


edit 16.11.2019:
seems to work with flow improver?

edit 23.10.2019:
ok so it seems to work, I recommend using varnish on the inside. THOUGH it seems you have to dilute the paint to get change the viscosity enough to make it flow properly. That means using thinner in the GW-paint and what I'd say is ruining the paints properties. I'm going to leave the 3D-model here, but with a disclaimer that without using something to dilute the paint it won't work properly, and if you do that in my opionion that'll make the