Thingiverse
CL-260-Z-Axis-Guide
door tobi_
9
Downloads
4
Likes
0
Makes
Z-Axis guide for the CL-260
======================
This parts "holds" the Z-Axis in place from the top position, avoiding the axis
to wobble to much due to the play of my rod-driving nuts.
(Make sure to align the rod, though, the guid only adresses wobble due to the
play of the nut)
Sources
-----------
The CAD files are on the git repository:
https://github.com/coldtobi/tobis_cl260_modifications
Print Setting
-----------------
I've printed with 3 perimeters and a layer height of 0.25 mm using ABS.
Honeycomb infill was set to 25%.
======================
This parts "holds" the Z-Axis in place from the top position, avoiding the axis
to wobble to much due to the play of my rod-driving nuts.
(Make sure to align the rod, though, the guid only adresses wobble due to the
play of the nut)
Sources
-----------
The CAD files are on the git repository:
https://github.com/coldtobi/tobis_cl260_modifications
Print Setting
-----------------
I've printed with 3 perimeters and a layer height of 0.25 mm using ABS.
Honeycomb infill was set to 25%.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
