cleaning wand

This is a cleaning wand for adult toys with both 3mf and Fusion 360 files included. The wand is meant to be used with a 7/8" (22mm) inner diameter silicone hose and attached to a standard-size US facet with a hose clamp, however, the Fusion 360 parameter **hose_adapter_od** can be adjusted for a differently-sized hose.

Printing tips:
- I've found printing vertically or at an angle helps make the part water-tight. I use a higher temperature and lower fan speed than normal to help melt the layers together and use PETG filament.
- I've printed the parts horizontally in PLA but the majority of the wand was not water-tight when printed in this orientation, so it needed a water-tight coating (e.g. silicone or epoxy).
- The wand can be printed on a Monoprice Select Mini (120mm cubed build volume) if the length is set to 165mm and angled both horizontally and vertically within the build volume (see pictures). The included 3mf is 160mm in length but if you use Fusion 360 you can adjust the **