![Clearview Race 150mm Patch array antenna mount/support [ManuTVLiVE] – Modelo 3D imprimible de Thingiverse](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F74%2Fd8%2Fb3%2Fcd%2Fe6%2Flarge_display_20200624_084205.jpg&w=800&h=800)
Thingiverse
Clearview Race 150mm Patch array antenna mount/support [ManuTVLiVE]
por m_hambloch
4
Descargas
1
Likes
0
Makes
Just a simple mount/support for a 150mm patch array antenna on the ClearView Race.
Use a M3x35mm screw + 2 nuts to mount the arms to the base. You can easily ajust the arms when the screw is in.
Base fits snug when you put in on the clearview for the first time. Leave it a few days and it will slide easily.
Print the base laying on its side with support "only touching heatbed".
Arms just flat head up.
I took the base from here and modified it for this thing:
https://www.thingiverse.com/thing:1959007
Use a M3x35mm screw + 2 nuts to mount the arms to the base. You can easily ajust the arms when the screw is in.
Base fits snug when you put in on the clearview for the first time. Leave it a few days and it will slide easily.
Print the base laying on its side with support "only touching heatbed".
Arms just flat head up.
I took the base from here and modified it for this thing:
https://www.thingiverse.com/thing:1959007
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!