Clefable card (HueForge)

File ready to print ________________________________________________Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.75x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ae96d4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Lilac Purple At layer #18 (1.52mm) swap to Lemon Yellow At layer #20 (1.68mm) swap to Ice Blue At layer #21 (1.76mm) swap to Hot Pink At layer #22 (1.84mm) swap to Jade White for the rest.