Clever

http://krestoni.com This design was created according to requirements for cost efficiency to manufacture and harmonic aesthetic appearance. There are only 3 plastic parts into the whole assembly - one pedal and two side shells. The standardized metal parts are as follows: one torsion spring, 4 screws M5 and 5 screws M3. The volume of the plastic assembly is 81277 mm3 (mass is approximately 0.097 kg). The technology for manufacture of the plastic parts is Injection moulding. Material - till 15% glass reinforced Polyamide, Polyurethane or Polypropylene with approximately hardness of 70 Shore D.