Thingiverse
Clock 3 Enclosure Door Latch
0
Download
0
Likes
0
Makes
This is a simple latch for an enclosure door.
The two (2) M5 screws holes are offset so that they will fit into 2020 t-slot extrusions. In the sample pictures, the wood strips are in front of t-slot extrusions, so you can picture how they fit together.
No supports are required. Print with at least 2mm walls (5 perimeters with an 0.4mm nozzle).
The two (2) M5 screws holes are offset so that they will fit into 2020 t-slot extrusions. In the sample pictures, the wood strips are in front of t-slot extrusions, so you can picture how they fit together.
No supports are required. Print with at least 2mm walls (5 perimeters with an 0.4mm nozzle).
jonspaceharper pubblica anche su
30 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
