Cloth Hinge Small Box

用于验证布料铰链的实验性作品，用于解决3d打印铰链的寿命问题，适用于收纳谷子及勋章，或作为其保护壳。所需额外物料：厚度在0.4-0.6mm的布料，建议对废旧衣物进行环保再利用。制造指南： 1.打印裁剪模板（template）。2.依照模板裁剪布料，宁短或小勿大或长，若布料弹性较好则应裁的更短些。3.使用尽量薄的双面胶粘在布料两端 。4.打印小盒（box printing）。5.在小盒暂停后将布料粘入凹槽内，尽量绷紧。 6.继续打印直到完成。 Experimental Piece for Validating Fabric HingesUsed to solve the problem of 3d printed hinge life.Suitable for storing grains, medals, or serving as a protective case.Additional Materials Required:Fabric with a thickness of 0.4–0.6 mm. Environmentally friendly reuse of old clothing is recommended.Fabrication Guide:Print the cutting template.Cut the fabric according to the template, erring on the side of shorter/smaller rather than larger/longer. If the fabric is highly elastic, cut it even shorter.Apply the thinnest possible double-sided tape to both ends of the fabric.Print the small box.Pause the box printing and adhere the fabric into the grooves, ensuring it is stretched taut.Resume printing until completion.