Clothes Rail

Definition:
Wall mounted holder for a rod. In combination they make a nice clothes rail.



List of Parts / Dimensions:
2x Holder: 10,5 x 10 x 1,5cm (ca. 7cm distance between rod and wall)
5h printing time per holder, 18m PLA, 52g

1x Rod: 2,8 cm (diameter)

4x Screws (+4x dowel when mounted in dry walls, etc.)

(Scaling down is no problem. Scaling up is possible, but could affect the stability of the object.)


Hints:
I use it myself and can assure you that it's quite strong. You probably could hang 15 kg on 2 of these. Make sure the reinforcement to the wall and the wall itself are capable of such, before you do so. The infill shouldn't be thinned out too much, or the structure will break. I advise a skin thickness of at least 2mm and an infill of more than 50%.
Always prefer a thicker skin than more infill for the best stability!


Disclaimer:
I do not accept liability for damage resulting from usage, installation or manufacturing of my product.