CM #1

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Light Blue Transmission Distance: 4.8 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Magenta Transmission Distance: 2.8 PLA+ Numakers Chocolate Brown Transmission Distance: 0.4 PLA+ Numakers Grass Green Transmission Distance: 4 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Apricot Transmission Distance: 11This print uses 8 unique filamentsSwap Instructions: Start with Pitch Black At layer #22 (1mm) swap to Light Blue At layer #23 (1.04mm) swap to Pure White At layer #31 (1.36mm) swap to Magenta At layer #33 (1.44mm) swap to Chocolate Brown At layer #45 (1.92mm) swap to Grass Green At layer #47 (2mm) swap to Nuclear Red At layer #50 (2.12mm) s