CM Devil #13

***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 89 hours to print***Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Royal Blue Transmission Distance: 3.2 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Teal Blue Transmission Distance: 4.8 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Bahama Yellow Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Pitch Black At layer #17 (0.48mm) swap to Royal Blue At layer #26 (0.66mm) swap to Pure White At layer #28 (0.7mm) swap to Pitch Black At layer #31 (0.76mm) swap to Teal Blue At layer #47 (1.08mm) swap to Pure White At layer #49 (1.12mm) swap to Pitch Black At layer #50 (1.