CM Devil #16

***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 44 hours to print*** You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Dark Grey Transmission Distance: 4.8 PLA+ Numakers Light Blue Transmission Distance: 4.8 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Outrageous Orange Transmission Distance: 10 PLA+ Numakers Teal Blue Transmission Distance: 4.8 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Apricot Transmission Distance: 11This print uses 8 unique filamentsSwap Instructions: Start with Pitch Black At layer #18 (0.5mm) swap to Dark Grey At layer #24 (0.62mm) swap to Light Blue At layer #31 (0.76mm) swap to Dark Grey At layer #34 (0.82mm) swap to Nuclear Red At layer #41 (0.96mm) swap to Outrageous Orange At layer #44 (1.02mm) swap to Dark Grey At layer #48 (1.1