CM Devil #7

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Dark Grey Transmission Distance: 4.8 PLA+ Numakers Light Gray Transmission Distance: 3.2 PLA+ Numakers Royal Blue Transmission Distance: 3.2 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Outrageous Orange Transmission Distance: 10 PLA+ Numakers Bahama Yellow Transmission Distance: 3.7 PLA+ Numakers Pure White Transmission Distance: 4.8This print uses 8 unique filamentsSwap Instructions: Start with Pitch Black At layer #24 (1.08mm) swap to Dark Grey At layer #26 (1.16mm) swap to Light Gray At layer #28 (1.24mm) swap to Royal Blue At layer #36 (1.56mm) swap to Nuclear Red At layer #45 (1.92mm) swap to Outrageous Orange At layer #46 (1.96mm) swap to Bahama Yellow