CMStorm Quickfire Rapid-i USB-C mod

**I've moved over to [printables.com](https://www.printables.com/@kaibs_2797709) for publishing my designs. Please consider downloading this design there: [printables.com | CMStorm USB-C Mod](https://www.printables.com/model/1182998-cmstorm-quickfire-rapid-i-usb-c-mod)**

___

A simple mount to directly replace the original USB-port of the CMStorm Quickfire Rapid-i with a USB-C one.

The two parts and the USB-Breakout-Board are simply glued together with superglue, I additionally secured the cables with some hot glue.

#### Parts used:

* Simple 4-pin USB-C breakout (the one I used on [AliExpress](https://de.aliexpress.com/item/1005001446500637.html?spm=a2g0s.9042311.0.0.27424c4dAuZHzp))

* 5-pin PH 2mm connector (on [AliExpress](https://www.aliexpress.com/item/4001235017139.html?spm=a2g0s.9042311.0.0.27424c4dAuZHzp), the 200mm version)

The fifth pin on the connector is used for the cable-shielding on the original setup.
For me everything works fine without it, so I removed the fifth