CNC 1610

CNC 1610 Machine with a few small modifications to allow for knows on the lead screws and for organization of the electronics, cabling & PSU on the back. A complete BOM can be generated from this document if you want to build it yourself. Assembly instructions added. Leadscrew Knobs: https://www.thingiverse.com/thing:2796202 Limit Switches & Drag Chain: https://www.thingiverse.com/thing:3630729 Notes on the link above: ********************** 1.) ~21 links are required for the drag chain 2.) I reworked the Z-axis limit switch holder and had to redesign the snap on retainer pieces since my machine used different spacers. Further to this I also duplicated the snap on pieces to the other side of the Z-axis motor. The reason for this was that my guide rods were vibrating out of the 3D printed socket upwards whilst machining and these addon pieces prevented this from happening again. 3.) I've used #12 x 3/4" round head screws to secure the X-axis switch holders in place instead of 5.5. mm screws. It is a bit tight so you have to use a bit of force to get the screws to cut into the aluminum but it works well once the threads have been cut. The rest of the designs are my own. Hopefully this helps someone out.