CNC 1610 Side Control Panel

A Side panel to control your CNC.
It works for all the cheap chinese CNCs (such as 1610, 2418, 3018) and any other cnc.

Functions:
- Power switch
- Spindle switch
- Probe connector

BOM:
- 2x SPDT switches - shorturl.at/dsNOU
- 2x Barrel Jack (5.5 x 2.1 mm) - shorturl.at/vxQWZ
- 2x M3 screw
- 2x M3 brass insert (optional)

Electrical connections:
Power switch: Connect the power switch in series with the PSU

Spindle: Cut one of the two wires that goes to the spindle and connect it in series with the spindle switch

Probe connector: connect it with one pole to GND and the other to A5 pin of the board (for Woodpecker cnc board)