CNC 3018 PCB clamping tools

Clamps and spacers for attaching 1.6mm copper clad board to the CNC3018 router. This may work with other routers but may require altering the hole centres to align with the slots in the bed.

Requires a minimum of 3 of the 1.6mm lift clamps and at least 1 of the 1.6mm lift long clamps. Possibly more depending on the size of the board to be held down.

The 1.6mm packers can be used to support the centre of the board. It is recommended to use double sided tape to hold the packers to the board and the bed to stop the board bulging in the centre. If preferred, the packers can be replaced with offcuts of copper clad board.