Thingiverse
CNC4Maker - CNC clamping tools
von MakeIsFun
14
Downloads
15
Likes
0
Makes
This design proposes to fix the objects on the CNC board from pressers.
To provide a rogressive and efficient clamping, the rouding of the presser is designed with method circle development instead of an extric approach.
extension wedges cover the gap between a part and a fixing point when:
- the presser is not large enough (50mm < d < 100mm).
- the presser is too big (d < 21mm) by using the longest wedge.
The center distance at two points on the board is 100mm, the pressers with the extensions allow you to cover the entire interval
To provide a rogressive and efficient clamping, the rouding of the presser is designed with method circle development instead of an extric approach.
extension wedges cover the gap between a part and a fixing point when:
- the presser is not large enough (50mm < d < 100mm).
- the presser is too big (d < 21mm) by using the longest wedge.
The center distance at two points on the board is 100mm, the pressers with the extensions allow you to cover the entire interval
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
