Coat hooks

If you want to build those coat hooks you will need:
Screw 120mm long, and 8mm thick. I used a 6 point screw.

Some epoxy resin and some Colours.
Thats what i used: https://www.amazon.de/Epoxidharz-Laminierharz-geruchsarm-Formenbau-DIPOXY-2K-700/dp/B07S435TDJ/ref=sr_1_7?dchild=1&keywords=epoxidharz&qid=1613389074&sr=8-7
Works great for me.

A form like this one https://www.amazon.de/gp/product/B07P5S5CG8/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

How to build this.
-Print out the holder and glue the screws on the bottom. (I used hot glue)
-Let it dry and fill the rest of the holder with epoxy. (Let the epoxy dry for 24 hours)
-Fill the forms halfway with epoxy and your color.
-Wait again 24 hours and place the holder in the middle of the form.
-Fill the rest of the form with epoxy and let it dry again.
-remove the holder from the mold and place it on a flat surface.(wait until its hard, it took another 24 hours for me)

After building this you can mount it on an