Cocoon Create Touch Mosfet Bracket

I'm not sure that the Cocoon Touch even needs a MOSFET because of the lack of compatible brackets, however, given the similarities to the Wanhao I3 Plus, I'll go out on a limb and say that at least adding the MOSFET shouldn't make it any more unsafe.

This is a remix of patprints mosfet bracket which I thought might fit mine but alas his was for the I3 with external control box - i think... At least his had the exact same hole slots as the BIQU Mosfet board I ordered from amazon: https://www.amazon.com.au/gp/product/B07BXVGHMW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1, so this one recycles some of that model and the idea of using the standoff's as anchor points. I added a couple of 2mm thick braces to reduce the chance of it bending or flapping around, but the one the photos is a prototype without the braces and it seems fine - I have to bend it deliberately to make it move.

You'll need:
4x M3 bolts 4mm, 5mm or 6mm - you pick. You might get away with up to 8mm but I haven'