Coffin Bowl - Deep

This Coffin Candy Bowl is an easy print and a great place for the Halloween Candy! This is a deep version of the bowl that holds 2 regular sized bags of fun sized candy. Sometimes you just need a simple bowl and this one fits the bill. Scale up or down in the slicer to get the maximum size of your build plate! Need one more shallow? Check out https://than.gs/m/943009 which is the other version of this bowl. .16 Layer height gives a really nice look to the outside. Go slower (140mm/s Max) on the outer wall. This prevents curling. If your edges curl you're going too fast. Use 6 walls and 100% infill for a sturdy bowl that will last year after year. This also speeds printing and quality as infill will cause it to print longer than walls alone. Please don't use this for food that is unpackaged unless you seal it to prevent germ build up between the layer lines. Resin sealing recommended for food use. Packaged candy and the like works just fine unsealed. Safety First! When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.