Thingiverse
Coheed and Cambria Keywork Fidget Spinner
par Gul_Delox
17
Téléchargements
14
Likes
0
Makes
Designed in Fusion 360 for a friend who is a massive Coheed and Cambria fan.
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't require any glue to keep them in place.
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't require any glue to keep them in place.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
