Collapsing Jian Multiple Parts

this model was originally by 3dprinting world on thangs https://thangs.com/designer/3dprintingworld/3d-model/Collapsing%20Jian-24803 This remix solves 3 problems I had. to make the blades print separate so I only had to worry about clearances on those, like some of his other collapsing models. Prevents blobs and layer shifts welding the parts together (see last photo) to provide a way to print the sword and hilt in different colors and layer heights to be able to replace the blade when it breaks The replacing ability comes from the pop off base I modeled into it. This is a very snug fit with only 0.15mm clearance to make sure its tight. There is a “loose” version with 0.3mm of clearance as well. If you need adjustments, you can scale on X and Y only by the appropriate amount. Print the blades on a MK3 or Mini at 0.4 widths on both perimeters and default extrusion width settings. Set seams to random to prevent buildup of any blobs in one spot, welding it together. set elephants foot com