Collie Hueforge

Project: fleur.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 143.33x215mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 3.4mm and the Actual Depth is 3.4mmFilaments Used: PETG PolyLite Black Transmission Distance: 0.3 PETG Anycubic Erdnussbraun Transmission Distance: 5 PETG Anycubic Beige Transmission Distance: 5 PETG Geeetech White Transmission Distance: 5This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #12 (1.12mm) swap to Erdnussbraun At layer #18 (1.6mm) swap to BeigeBorder Only Colors from here until the end. At layer #26 (2.24mm) swap to White for the rest.