Thingiverse
Colored pencil holder
par me5647
500
Téléchargements
458
Likes
2
Makes
Colored pencil holder sized for prismacolor pencils. Other pencils with a diameter of 0.29" should fit. 12 pencils fit in each base piece and two bases are attached with a link, so it can hold as many pencils as you have. Pencils can be stored tip up or down, there is a step in the base to keep the tip from hitting the bottom and breaking when stored tip down.
I used 3mm filament 'rivets' to attach the pieces together, and I think it gave it a nice clean look.
(http://makezine.com/projects/make-34/skill-builder-finishing-and-post-processing-your-3d-printed-objects/) Scroll down to "Using Filament to Make Solid Rivets and Hinges"
Alternatively you could probably use a screw and a nut. I think a 4-40x.75 flat head machine screw from the bottom with a nylock nut on top would work ok.
Both the size of the pencil holes and the end holes are pretty critical for the holder to function properly. I've included a test piece 'base2_test.stl', and would recommend printing a test, check
I used 3mm filament 'rivets' to attach the pieces together, and I think it gave it a nice clean look.
(http://makezine.com/projects/make-34/skill-builder-finishing-and-post-processing-your-3d-printed-objects/) Scroll down to "Using Filament to Make Solid Rivets and Hinges"
Alternatively you could probably use a screw and a nut. I think a 4-40x.75 flat head machine screw from the bottom with a nylock nut on top would work ok.
Both the size of the pencil holes and the end holes are pretty critical for the holder to function properly. I've included a test piece 'base2_test.stl', and would recommend printing a test, check
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
