Colorful bear

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x113.33mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Indigo Purple At layer #9 (0.8mm) swap to Blue At layer #12 (1.04mm) swap