Colour Puzzle

This Colour Puzzle is an engaging, interactive game designed to enhance cognitive skills through colour matching and problem-solving.Where as it serves as an educational toy for children, it is also a fun challenging puzzle for people of all ages to enjoy.This model doesn't require any multi colour capabilities. The sliders can be printed in all one colour, or to achieve the two colour sliders like in the cover image, simply slice the slider model and add a pause or change filament for CFS at layer 6.Assembly is a breeze, with no additional hardware required and no messy glue ups. I have included a PDF with a set of puzzle cards to get started with, or you can easily create your own.Read on to see assembly information.Parts List:1x Back, 1x Front, 12x Slider, 12x Slider fastener.Assembly:Place sliders into slots on front section and screw fastener onto sliders.The front and back sections snap-fit together. The image below indicates the catches.Place one side in first and press firmly down to seat.At the top of the runners are snap connectors. These need to be press down on one side, then the other, like in the image below. You will feel each side pop over the catches on the back section. Repeat for all three of the runners. Should you need to disassemble it is simply a reverse of these instructions. To remove the front section from the back section, use something like a plastic scraper to wedge between the two parts where the catches are.