Combat Medic HueForge

HueForge of a Combat Medic saving his friend from the Reaper Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 145.95x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA Sunlu Black Transmission Distance: 1 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Red At layer #7 (0.64mm) swap to Black At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to Blue Gray At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Orange At layer #18 (1.52mm) swap to Yellow for the rest. Boost MeIf you like this print, please co