Comical Bird House

This project was conceived when my wife said: "We need a new bird house!". I knew that if I did not act quick she would buy one. Thus this project was born.

I wanted to make it funny, easy to assemble (no gluing) and easy to disassemble for cleaning, and be able to replace parts if needed. Well, I did not completely escape the glue requirement. My perch idea did not work so that needs to be glued to the front. The locking pins that hold everything together needed a design change thus a two piece design was born and those need to be glued together.

I was able to print this in two colors by doing a filament change after the "base" of the front, right side, left side, and roof were completed and before the pictures and text are printed. The thickness of the "base" of those pieces is 5.9 mm. So if you can do a change filament after the printer completes the 5.9 mm layer you will be good to go.

For best results the first layer thickness should be .3 mm and the remaining laye