Commando strip Cutting Board Holder

✨ Features ✅ No screws needed ✅ No drilling ✅ Easy to install ✅ Great for cabinet doors ✅ Saves kitchen space ✅ Clean and minimal design ✅ Rental-friendly ✅ Simple print ✅ Perfect for everyday kitchen use 🧼 Clean kitchen storage 🛠️ No screws, No drilling ⚡ Print, stick, and use. This is a simple 3D printable cutting board holder that mounts with Command Strips or similar adhesive strips. Just print the parts, apply the strips, place your cutting boards in the holder, and press it onto a cabinet door, wall, or pantry surface. Perfect for keeping your cutting boards easy to grab while saving drawer and counter space. B.O.M Printed left holder part Printed right holder part Command Strips or similar adhesive strips The petrusions in the print accounts for commandstrips. 🚀 Easy installation Print the two holder parts One left side and one right side. Apply adhesive strips Add Command Strips to the flat back areas of the parts. Use your cutting boards for spacing Place the boards in the holder before mounting so everything lines up nicely. Press onto the surface Mount it on a cabinet door, kitchen wall, pantry door, or another flat surface. Let the adhesive bond Follow the instructions for your adhesive strips. Slide in your cutting boards Done — clean, simple storage. 🖨️ Recommended print settings Material: PLA, PLA+, or PETG Layer height: 0.20–0.28 mm Walls: 3–4 Infill: 15–25% Supports: Usually not needed Brim: Optional For heavier boards or warmer kitchen areas, PETG is a good choice. 📌 Notes Make sure your adhesive strips are rated for the total weight of the holder and the cutting boards. For best results, clean the mounting surface before applying the strips and follow the adhesive manufacturer’s instructions. This holder is designed for normal lightweight to medium kitchen cutting boards. 🏠 Great for Small kitchens Apartments Rental homes RVs and campers Pantry organization Cabinet door storage Minimal kitchen setups