Compact Camera Tripod - foldable, M3 edition

Really liked the original design, but have only mostly M3 hardware available, not much of M5.

So i redesigned it to be printed for M3 bolts and the bolts are intended to directly thread into the plastics (i print with PETG so this works very well, i don't know how well it would work with PLA). It turned out that the resistance when folding and unfolding is just right (or maybe slightly higher than necessary), and i use it together with thing 2221802 to hold a smartphone.

You need 2 M3x10 and 2 M3x25 bolts.

The diameter for through holes (bolts just pass through) is 3.5mm and the diameter for "thread-in" bolts is 3 mm. For my printer this works well, but you might have to adjust the diameters.

Fusion 360 files are attached for easier customization.