Compact Dice Tower

A compact dice tower (roughly 60x60x100mm) with print-in-place fold down tray and integrated lid. When closed, functions as dice storage.

Version 5 has the lid integrated into the tray. There is also the older version (v4) with a separate, friction-fit lid that in my opinion is strictly worse.

Tower and tray are printed as one unit. Important: NO SUPPORTS. The axis around which the tray rotates is integrated inside the structure and the tray and tower are not separable.

After printing you need to open the tray using a moderate amount of force, and depending on your printer you may also need to use a sharp utility (Stanley-type) knife to remove any adhesions between the tray sides and the tower. The tray's front (lid) side is especially likely to adhere to the tower. See the attached schematic.

To open, have the tower with the opening upwards, grab with your fingers under the front wall of the tray, bend it slightly upwards and try to rotate the tray open. You will need to u