Slicer Discord
compressed air engine / pneumatic engine – 3D-Druckmodell von Thingiverse Thingiverse
compressed air engine / pneumatic engine – Bild 1 compressed air engine / pneumatic engine – Bild 2 compressed air engine / pneumatic engine – Bild 3 compressed air engine / pneumatic engine – Bild 4 compressed air engine / pneumatic engine – Bild 5 compressed air engine / pneumatic engine – Bild 6
Learning

compressed air engine / pneumatic engine

34 Downloads
20 Likes
0 Makes
Zum Modell
A simple but good working compressed air engine. It works even with your lung, no pump required! I designed it because i wanted to make my own motor and develop my design skills and my knowledge about tolerance in 3D printing. Im also fascinated how simple it is to build such a nice engine.

Parts you need:
- 4 M3x16mm screws with nuts for the casing
- 2 M3x12mm screws with nuts for the cylinder and the crankshaft
- 1 M2,5x14mm screw (It is placed at the top of the "Ventilhebel" to adjust the opening time
of the Valve. Cut away the head of the screw and make it a bit smaller at the top for
more air flow)
- 1 6mm BB (from a Airsoft gun for example)
- 1 O ring with inner diameter: min. 5mm and outer diameter: max. 7mm
- 1 Ball Bearing with inner diameter of 8mm and outer diameter of 22mm
- some sealing paste to prevent "Gehäuse" and "deckel" from leaking
- Glue for the parts of the casing

Use a little bit of the sealing paste to fix the O ring in its position.
Kategorie
Learning
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen