Configurable Square Standoff

This can be used as a basic spacer/standoff for mounting components (ESC, Flight Controller) to quadcopter frames. It is very configurable, so the size, thickness, foot diameters, etc can all be set to needed/desired values.

This can also be configured adapt different sized boards (in my case, such as the Piko BLX, with a 22.5mm hole spacing) and mounting hole spacings (such as the standard 30mm holes found on many small quads). It can be configured so that the smaller FC can be aligned directly with the larger hole spacing, or mounted at an angle to the larger hole spacing. (Such as is needed on the FlexRC Mini Owl.) The base plate can also be made with a height of zero, resulting in just printing tubular standoffs.

If standoff space is required on both sides of a standoff, simply print 2 standoffs, and place them back-to-back (such as in the picture of the Mini Owl ESC and FC mounting). This is a lot better than trying to print an elevated/supported base plate. (As an example,