Contact Case Drying Trays

I wanted to be able to dry my contact case without it touching the sink. I made 2 different models. Neither needs supports or rafts. The one with bars prints back-down. The one with a grid mesh prints upside-down.This is a basic tinkercad design.To print the infill tray, make sure the top and bottom layers are set to 0. The mesh is created through setting your infill to whatever you want the pattern to be. I went with 20% Grid infill. You also want 1.2mm walls so that the sides are solid and wider than the top grid.I also uploaded this to thingiverse: https://www.thingiverse.com/thing:5869664